Inicio Equipamiento Bicicletas Mecánica Consejos Trucos MTB Lugares Fotos
Sistema De Transmisión Shimano Hasta 1999. Sistema De Cambios Shimano Hasta 1999. E-mail
| |
Combinaciones Recomendadas Para Cadenas,
Platos Y Piñones Hasta 1999
| | Mega 9 | IG | HG | | Cassette Sprocket | Front Chainwheel | Cassette Sprocket | Front Chainwheel | Cassette Sprocket | Front Chainwheel | | CS-M952 CS-M750 CS-HG70-9 | FC-M952 FC-M750 FC-M570 | CS-IG50
CS-IG60 | FC-M951 FC-M739 FC-M737-IG FC-M569 FC-M563-IG FC-MC40 FC-MC36 FC-MC34 FC-MC33 FC-MC32 FC-MC18 FC-MC16 FC-MC14 FC-MC12 FC-M330 | CS-M950 CS-M900-I CS-M737-I CS-HG70-8I CS-HG60-8I CS-HG50 CS-HG30 | FC-M FC-M900 FC-M737 FC-M563 FC-M291 FC-M290 FC-CT93 FC-CT92 FC-CT91 FC-CT90 FC-T301 FC-T300 FC-TY40 FC-TY30 FC-TY30A | | Mega 9 super narrow chain CN-7700 CN-HG92 CN-HG72 | GOOD | GOOD | NO GOOD | NO GOOD | NO GOOD | NO GOOD | | IG Chain CN-IG90 CN-IG70 CN-IG51 CN-IG31 | NO GOOD | NO GOOD | GOOD | GOOD | GOOD (Note3) | NO GOOD poor performance | | HG Chain CN-7401 CN-HG91 CN-HG90 CN-HG70 CN-HG50 CN-UG50 | NO GOOD | NO GOOD | NO GOOD poor performance | NO GOOD Will not work (Note 2) | GOOD | GOOD | | Note 1: The IG chain cannot be used with the ALTUS® class rear derailleurs. Note 2: This combinetion must be avoided because sudden chain separation may occur resulting in possible accident. Note 3: Use an IG chain with CS-M737 or CS-HG70-8 Hyperglide cassette sprocket will make the derailleur adjustement more critical than usual. |
Subir | |  | | CN-HG50 | 1/2" x 3/32" Narrow | | Pin Length: 7.3 mm. | | Pin Power: Min. 150 kgf. | | Tensile Strength: 1050 kgf. | Finish: Brown |
 | | CN-HG72 | | 1/2" x 11/128" Super Narrow | Pin Length: 6.6 mm. | | Pin Power: Min. 200 kgf. | | Tensile Strength: 1050 kgf. | | Finish: Dark Silver / Brown |
 | | CN-IG31 | | 1/2" x 3/32" Narrow | | Pin Length: 7.1 mm. | | Pin Power: Min. 110 kgf. | | Tensile Strength: 1050 kgf. | | Finish: Dark Silver / Black |
 | | CN-IG51 | | 1/2" x 3/32" Narrow | | Pin Length: 7.1 mm. | | Pin Power: Min. 150 kgf. | | Tensile Strength: 1050 kgf. | | Finish: Nickel / Black |
 | | CN-UG50 | | 1/2" x 3/32" Narrow | | Pin Length: 7.3 mm. | | Pin Power: Min. 110 kgf. | | Tensile Strength: 1050 kgf. | | Finish: Brown |
|
