| ||||||||
| Inicio >>> Mecánica >>> Manuales y Especificaciones >>> Especificaciones Shimano DEORE LX 1997 | ||||||||
| Specification | Series | DEORE LX 1997 | ||||||
| Rear Derailleur | Model No. | RD-M567 | ||||||
| Advanced Light Action | yes | |||||||
| IG Compatibility | yes | |||||||
| Speeds | 8-speed | |||||||
| Max. Sprocket | 32T | |||||||
| Min. Sprocket | 11T | |||||||
| Front Difference | 20T max | |||||||
| Total Capacity | 39T | |||||||
| Parallelogram Spring Adjuster | no | |||||||
| Guide Pulley Pivot | chromized steel bushing | |||||||
| Tension Pulley Pivot | chromized steel bushing | |||||||
| Pulley Bolts | stainless steel | |||||||
| Hanger Bracket | aluminum/electrostatic painted | |||||||
| Hanger Bracket Pivot Bolt | steel | |||||||
| Hanger Bracket Pivot Seal | single O-ring | |||||||
| Pulley Cage Bracket | aluminum/electrostatic painted | |||||||
| Pulley Cage Pivot Bolt | steel | |||||||
| Pulley Cage Pivot Seal | no | |||||||
| Outer Link | aluminum/painted | |||||||
| Inner Link | steel | |||||||
| Link Pin Bushing | Teflon™ coating (2) | |||||||
| Outer Pulley Cage | steel/chrome plated | |||||||
| Inner Pulley Cage | steel/chrome plated | |||||||
| Weight | 285g | |||||||
| *Front Derailleur | Model No. | FD-M567 | FD-M567-E | FD-M566 | ||||
| Advanced Light Action | yes | yes | yes | |||||
| Dual SIS | yes | yes | yes | |||||
| Top-swing Action | yes | yes | no | |||||
| Differential Plate Mechanism | no | no | no | |||||
| Rear Compatibility | 8-speed | 8-speed | 8-speed | |||||
| Top-low Max. Capacity | 20T | 20T | 20T | |||||
| Top-middle Min. Capacity | 10T | 10T | 10T | |||||
| Large Chainring | 42T | 42T | 42T | |||||
| Cable Routing | top & bottom route types available | |||||||
| Chain Stay Angle | 63 - 66°/66 - 69° | |||||||
| Mount Type | Seat Tube Band Mount | 28.0 - 28.6/31.8/34.9mm | -- | 28.0 - 28.6/31.8/34.9mm | ||||
| Band Material | aluminum | -- | aluminum | |||||
| B.B. Mounting Plate | -- | yes | -- | |||||
| Plate Material | -- | aluminum | -- | |||||
| Outer Link | aluminum | aluminum | ||||||
| Inner Link | aluminum | aluminum | ||||||
| Link Pin Bush | inner | outer & inner | ||||||
| Cable Anchor Nut | standard | |||||||
| Clamp Bolt & Cable Anchor Bolt | stainless steel | |||||||
| Adjustment Bolts | stainless steel | |||||||
| Chain Cage | steel/chrome plated | steel/chrome plated | ||||||
| Weight | 128g | |||||||
| V-Brake Lever | Model No. | BL-M600 | ||||||
| For V-Brake Only | yes | |||||||
| Power Adjuster | 3-step | |||||||
| Lightweight Lever | yes | |||||||
| Reach Adjuster | yes | |||||||
| Lever Pivot Bushing | low friction | |||||||
| Dust Cover | no | |||||||
| Brake Cable Casing | M-system | |||||||
| Brake Cable | stainless steel (option) | |||||||
| Clamp Bolt | stainless steel | |||||||
| Weight | 175g | |||||||
| Rapidfire SL Lever Set | Model No. | ST-M567 | SL-M569 | |||||
| Shift Lever Specs | Types | combined shift & brake lever set | shift lever set only | |||||
| Advanced Light Action | yes | yes | ||||||
| Rear | 8-speed | 8-speed | ||||||
| Front | triple | triple | ||||||
| Optical Gear Display | yes | yes | ||||||
| Removable OGD Module | yes | no | ||||||
| Shift Cable Casing | sealed SIS-SP40 | |||||||
| Shift Cable | stainless steel | |||||||
| Brake Lever Specs | For V-Brake Only | no | -- | |||||
| Power Adjuster | no | -- | ||||||
| Lightweight Lever | yes | -- | ||||||
| Reach Adjuster | yes | -- | ||||||
| Lever Pivot Bushing | low friction | -- | ||||||
| Dust Cover | no | -- | ||||||
| Barke Cable Casing | M-system | -- | ||||||
| Brake Cable | stainless steel (option) | -- | ||||||
| Clamp Bolt | stainless steel | stainless steel | ||||||
| Weight (pair) | 335g | 249g | ||||||
| V-Brake/ Cantilever Brake | Model No. | BR-M565-E | BR-M600 | BR-MC33-E | ||||
| V-Brake System | no | yes | no | |||||
| M-System | yes | yes | yes | |||||
| Parallel Link | no | no | no | |||||
| Brake Pad Types | M-65T | M-70T2 | M-65T | |||||
| Arm Length | M | -- | M, L | |||||
| Link Types | dynamic Y-type | -- | dynamic Y-type | |||||
| Enclosed Pivot Sleeves | yes | yes | no | |||||
| Bushings | hard brass | hard brass | steel | |||||
| Spring Tension Adjuster | yes | yes | yes | |||||
| Fixing Bolt | stainless steel | stainless steel | stainless steel | |||||
| Easy-access Cable Fixing Bolt | yes | yes | yes | |||||
| Weight | 370g | 404g | 366g | |||||
| ***Crankset | Model No. | FC-M569 | FC-M569-5arm | FC-M563-I | ||||
| HyperDrive-C | yes | yes | yes | |||||
| Dual SIS | yes | yes | yes | |||||
| 4-Arm Chainring | yes | no | no | |||||
| Chainring Types | IG chainring | IG chainring | IG chainring | |||||
| Chain Types | IG chain | IG chain | IG chain | |||||
| Number of Teeth | 42-32-22T | 42-32-22T | 42-32-22T | |||||
| Bolt Circle Diameter | 104/64mm | 94/58mm | 94/58mm | |||||
| Crank Arm Length | 170/175mm | 170/175mm | ||||||
| Crank Arms | aluminum | aluminum | ||||||
| Crank Bolts | stainless steel | chromemoly steel | ||||||
| Outer Chainring | aluminum | aluminum | aluminum | |||||
| Middle Chainring | aluminum | aluminum | 7075 aluminum | |||||
| Inner Chainring | aluminum | steel | steel | |||||
| Chainring Bolts & Nuts | stainless steel | stainless steel | stainless steel | |||||
| Chainguard | yes | yes | yes | |||||
| Weight | 697g (175mm) | 721g (175mm) | 681g (170mm) | |||||
| ****Bottom Bracket | Model No. | BB-UN52 | BB-UN52-E | |||||
| Chain Line Stabilizer | yes | yes | ||||||
| Marking | MM107 | MM110 | LL113 | MM110 | LL113 | |||
| Chain Line | 47.5mm | 47.5mm | 50.0mm | 47.5mm | 50.0mm | |||
| B.B. Shell Width | 70/68mm | 73/70/68mm | 73/70/68mm | 68mm | 73mm | |||
| Spindle Length | 107mm | 110.5mm | 113mm | 110.5mm | 113mm | |||
| Spindle | chrome-moly steel | chrome-moly steel | ||||||
| Adapter | steel | steel | ||||||
| Weight | ||||||||
| Rear Freehub | Model No. | FH-M565 | FH-R080 | |||||
| Sprockets | 8-speed | 8-speed | ||||||
| 11T Small Sprocket | yes | yes | ||||||
| Roller Clutch | no | yes | ||||||
| Parallax Design | yes | yes | ||||||
| Over Locknut | 135mm | 135mm | ||||||
| Axle Length | 146mm | 146mm | ||||||
| Axle Diameter & Material | 10mm steel | 10mm | ||||||
| QR Lever | aluminum | aluminum | ||||||
| QR Housing | aluminum | aluminum | ||||||
| QR Nut | aluminum | aluminum | ||||||
| Stainless Steel Ball Bearings | no | no | ||||||
| Cone Races | Borozon* | Borozon* | ||||||
| Cup Races | polished | barrel polished | ||||||
| Contact Sealing | double | double | ||||||
| Spoke Holes | 36/32 holes | 36/32 holes | ||||||
| Spoke Hole Circle | 45mm | 45mm | ||||||
| Sprocket carrier Ring | steel | steel | ||||||
| Hub Shell | aluminum/anodized | aluminum/anodized | ||||||
| Weight | 442g | 559g | ||||||
| Cassette Sprocket | Model No. | CS-HG70-I | ||||||
| Sprocket Carrier | no | |||||||
| Number of Sprockets | 8-speed HG | |||||||
| Group Identification | an, ah | |||||||
| Sprocket | steel | |||||||
| Sprocket finish | silver | |||||||
| Chain Compatibility | IG chain | |||||||
| 11T Small Sprocket | yes | |||||||
| Weight | 326g (ah-group) | |||||||
| Chain | Model No. | CN-IG70 | ||||||
| Type | IG narrow chain | |||||||
| Inner Link Finish | barrel polished | |||||||
| Outer Link Finish | nickel plated | |||||||
| Link Pins | chromized/polished pin end | |||||||
| Weight | ||||||||
| Front Hub | Model No. | HB-M564 | HB-M563 | |||||
| Parallax Design | yes | yes | ||||||
| Over Locknut | 100mm | 100mm | ||||||
| Axle Length | 108mm | 108mm | ||||||
| Axle Diameter & Material | 10mm steel | 9mm steel | ||||||
| QR Lever | aluminum | aluminum | ||||||
| QR Housing | aluminum | aluminum | ||||||
| QR Nut | aluminum | aluminum | ||||||
| Stainless Steel Ball Bearings | no | no | ||||||
| Cone Races | Borozon* | |||||||
| Cup Races | polished | |||||||
| Contact Sealing | double | |||||||
| Spoke Holes | 36/32 holes | |||||||
| Spoke Hole Circle | 38mm | |||||||
| Hub Shell | aluminum/anodized | |||||||
| Weight | 218g | 205g | ||||||
| Headset | Model No. | HP-M563 | HP-M564 | |||||
| Sealed Cartridge Bearings | yes | yes | ||||||
| Thread | BC1" x 24TPI | BC1-1/8" x 24TPI | ||||||
| Stack Height | 37.6mm | 37.6mm | ||||||
| Locknut | aluminum w/rubber seals | |||||||
| Lock Washer | stainless steel | |||||||
| Upper Stem Cone | aluminum | |||||||
| Upper Head Tube Cup | steel | |||||||
| Lower Stem Cone | steel | |||||||
| Cartridge Bearing Unit Sealing | resin seals | |||||||
| Weight | 146g | 161g | ||||||
| SPD Pedal | Model No. | PD-M535 | ||||||
| SPD Cleat Surfaces | both pedal surfaces | |||||||
| Floating Cage | no | |||||||
| Spindle Thread | BC 9/16" x 20TPI | |||||||
| Spindle | chrome-moly | |||||||
| Cartridge Bearing Spindle | no | |||||||
| Cleat Retention Indicator | yes | |||||||
| Cleat Retention Adjuster | yes | |||||||
| Easy Step-in Feature | yes | |||||||
| Body | aluminum/black anodized | |||||||
| Binding Plate | steel/chrome plated | |||||||
| Weight | 410g (pair) | |||||||
| Seat Post | Model No. | SP-M650 | ||||||
| One-bolt Clamp | yes | |||||||
| Easy Adjust Feature | yes | |||||||
| Special Easton Tubing | no | |||||||
| Outer Diameter | 26.4/26.6/26.8/27.0/27.2mm | |||||||
| Length | 280/330/360**mm | |||||||
| Material | chrome moly steel | |||||||
| Weight | 325g (360mm) | |||||||
| Seat Quick Release | Model No. | SQ-M730 | ||||||
| Position Hold Spring | yes | |||||||
| Shaft Length | 36 - 43mm/26 - 33mm | |||||||
| Shaft Diameter | 6mm/8mm | |||||||
| Material & Finish | steel/chrome plated | |||||||
| Weight | 75g | |||||||
| Chain Deflector | Model No. | DF-M730 | ||||||
| Material | plastic resin | |||||||
| Weight | 9g | |||||||
| * Front derailleur chain stay angle is marked on the back of the chain guide. Component specifications are marked on the box. model no. FD-M739-DS6 cable routing (D=down, T=top)clamp band size (S=small, M=medium, L=large) chain stay angle (6=66-69º, 3=63-66º) ** The E-type front derailleur mounts to the bottom bracket through a support plate and also requires a special boss or clamp adapter on the seat tube. *** FC-M950-HG crankset with conventional 5-arm spider is also available. **** E-type bottom bracket is for use with bottom bracket mount front derailleurs. * The Borozon polishing process provides an ultla-smooth and precise bearing race surface. ** 360mm length is available in 27.2mm diameter only. | ||||||||
